
Note: Firmware Ebyte_EoRa-S3 does not work on Eora-Hub because it has different radio.
Update: tested, it works with Ebyte_EoRa_HUB_companion_radio_v1.18.dev_1114_merged.bin
if flashed with the Flash Download Tool
All firmwares: https://github.com/dt267/MeshCore-Low-Power-Firmware/releases
At this moment, CDEBYTE EoRa Hub is not supported in the mainstream firmware.
However, it is supported this fork above, hopefully soon merged into mainline.
Flashing does not work with web flasher for now.
Flashing:
Flash Download Toolfrom: https://docs.espressif.com/projects/esp-test-tools/en/latest/esp32/production_stage/tools/flash_download_tool.htmlSelect ESP32-S3

Optional: Backup flash
copy size 0x400000 (4MB) baud 921600 (max)

Erase
Start

Reset the board by removing all power. The display should show Meshcore.
0 comments
Comments are closed for this article.